Other Sports ***Official Bushwood Country Club Lounge*** - Page 35

smittysbar · 05-11-2008, 11:49 AM

Okay, here is a place for the Golfers to talk about tournaments, clubs, swing help or thoughts.

Today is the Players Championship, which I think ought to be the 5th Major. Largest pot in the PGA. The daunting 17th, which seems to bring excitement every year. At least we will get to see Sergio blow up yet again.

I am ready to see some water balls!

smittysbar · 06-22-2008, 08:22 PM

Quote:

Originally Posted by BWillie007

Nice! Do you upkeep the green so the ball re-acts similar to regular greens? If I had enough room in my yard I'd love to do something like that. I really need to get back into golf. I shot 85 my first time out this year. Shanked 4 chips and had about a billion putts. I've always been a good ball striking and I've been able to get chipping down back when I played alot. I could NEVER putt though. It's impossible. I've tried everything except a belly putter

No the green is just mowed down tight, but the ground is pretty rough.

I HATE SHANKING!!!!!

smittysbar · 06-22-2008, 08:25 PM

Quote:

Originally Posted by CoMoChief

you are so full of shit.

Hey, did Ryan ever upload that video of me teeing off of the beer can to you tube?

**Dartgod** · 06-22-2008, 08:29 PM

I forgot this thread was here, so I'll quote your post in my driver advice thread.

Can you explain what you mean about the shaft? I've been playing for quite a few years, but am just a hacker, so I don't keep up with club technology. The club I'm looking to buy comes in either regular or stiff shaft. Nothing about what you mentioned was indicated.

Quote:

Originally Posted by smittysbar

But the shaft on the other hand is very important. Sounds as if you are getting plenty of height, I would go with a low kick point, low torque shaft. Shafts IMO are the most important thing to fit yourself to than anything else.

If you guys enjoy golf and discussing rounds and swings, we have a thread on it.
http://www.chiefsplanet.com/BB/showt...184595&page=13

smittysbar · 06-22-2008, 08:36 PM

Every shaft has a kick point. The lower the kick point the higher the ball flight. High or mid kick point will usually result in a lower launch. The lower the Torque # in a shaft, is most likely the higher the price. Less twisting of the club head.

A good thing to do is go somewhere and get fitted, you don't have to buy from them but a good pro could tell you what shaft would fit you the best.

**Skip Towne** · 06-22-2008, 08:41 PM

Quote:

Originally Posted by Dartgod

I forgot this thread was here, so I'll quote your post in my driver advice thread.

Can you explain what you mean about the shaft? I've been playing for quite a few years, but am just a hacker, so I don't keep up with club technology. The club I'm looking to buy comes in either regular or stiff shaft. Nothing about what you mentioned was indicated.

If you need a stiff shaft but swing a regular, the ball will push and slice. The reason is the shaft will flex and your hands get ahead of the ball leaving the club face open at impact.

**Dartgod** · 06-22-2008, 08:51 PM

Quote:

Originally Posted by Skip Towne

If you need a stiff shaft but swing a regular, the ball will push and slice. The reason is the shaft will flex and your hands get ahead of the ball leaving the club face open at impact.

That I understand. I wasn't sure what kick point a torque were all about.

BWillie · 06-22-2008, 08:52 PM

Quote:

Originally Posted by Skip Towne

If you need a stiff shaft but swing a regular, the ball will push and slice. The reason is the shaft will flex and your hands get ahead of the ball leaving the club face open at impact.

I read somewhere though that 95% of people have a shaft that is too stiff. Not sure how much truth there is for that. Some PGA Pro told me that because I didn't like graphite irons.

smittysbar · 06-22-2008, 08:55 PM

From Tom Wishon
A. The term "torque" is taken to mean the shaft's designed resistance to twisting during the downswing. The torque value is expressed in degrees, so the lower the degrees of torque, the more resistance the shaft will have to being twisted from the force of the downswing on the clubhead attached to that shaft. The higher the degrees of torque, the less resistance the shaft will have to being twisted by the mass of the clubhead on the downswing.

In steel shafts, because the type of steel material is the same throughout the entire shaft, the torque exists in a very narrow range of degrees, one that is much more narrow than in graphite shafts.

Graphite shafts can be and often are made with a wide variety of different graphite fiber strength, stiffness and position on the shaft. This allows the torque in graphite shafts to range from as high as 7 or 8 degrees to as low as 1 degree, while in steel this range is only from a little more than 2 degrees to a little under 4 degrees.
Therefore, torque is not a factor to worry about in the selection of a steel shaft, but it is a point to keep in mind for some golfers when selecting a graphite shaft.

Fortunately, the fitting ramifications of torque even in graphite shafts is not that severe. Simply stated, it means that if you are a big strong, powerful person with an aggressive swing tempo and a late release, you never want the torque in a graphite shaft to be any higher than 4 to 4.5 degrees. Otherwise, your strength and downswing force may cause the clubhead to twist the shaft, causing the clubface to be more open at impact, and resulting in a shot that hangs or fades to the right of your target.

Conversely, if you have a very smooth, rhythmic swing without a very aggressive downswing move, you do not want to use graphite shafts with the torque below 3.5 degrees or else the impact feel of the shot can be stiff, harsh and unsolid, and the height of the shot may be too low. So for most golfers, as long the torque of a graphite shaft is between 3.5 and 5.5 degrees - which is the case for the vast majority of graphite shafts today - the golfer will be OK and torque will never be a factor to worry about in the shaft fitting.

**Skip Towne** · 06-22-2008, 09:00 PM

Heh, I had a set of clubs that had a "reverse twist" built into the shaft for "anti torque". I think they were McGregor's.

smittysbar · 06-22-2008, 09:08 PM

As club head size has increased so has the need for low torque shafts, these heads on the new drivers are mammoth. Mine looks like a frying pan.

**Skip Towne** · 06-22-2008, 09:09 PM

Quote:

Originally Posted by smittysbar

As club head size has increased so has the need for low torque shafts, these heads on the new drivers are mammoth. Mine looks like a frying pan.

Herzig's sounds like a shotgun going off.

smittysbar · 06-22-2008, 09:10 PM

yeah mine is loud as hell too.

smittysbar · 06-22-2008, 09:31 PM

Shaft Flex and Bend Point
Every shaft has a Flex Rating (usually L, R, S, XS) and a bend point (Low, Mid and High). (Bend point, by the way, is also called kickpoint.) The unfortunate thing is that there is no industry standard for shaft flex - one manufacturer's Regular Flex shaft may be firmer or weaker than another manufacturer's. These differences will produce shafts that, even though they have the same Flex Rating, will play differently.
One difference will be in Swing Speed Ratings. One 'R' flex shaft might be rated for 65 to 75 mph while another is rated for 75-85 mph. Bend point determine the ball's trajectory so the golfer has to decide what type of ball flight he wants.

HOW TO CHOOSE: My experience as a club builder is that most golfers play with clubs that are too stiff. As noted above, you should determine what your swing speed is and choose your new shaft flex accordingly. (Note: The effect of torque on shaft flex is discussed on the following page.)
If you find your ball flight is too low or too high, then choosing a shaft with the right bend point can help. If you want to hit the ball on a lower trajectory, choose a bend point of High. For a higher trajectory, choose a bend point of Low. For something in between, go with Mid rating for bend point.

Shaft Flex Selection Chart
Carry Distance	Swing Speed	Flex
Under 180 yards	Under 75 mph	Ladies
180 to 200 yards	75 to 90 mph	Amatuer / Senior
200 to 240 yards	90 to 100 mph	Regular
240 o 275 yards	100 to 110 mph	Stiff
Over 275 yards	Over 110 mph	Tour (extra) Stiff

Herzig · 06-22-2008, 10:05 PM

Quote:

Originally Posted by Skip Towne

Herzig's sounds like a shotgun going off.

Yeah, that Cobra was sold to one of my Groomsmen a couple of years ago. It was LOUD. But that was when the big driver heads became popular. My PING G10 is nowhere near as loud.

smittysbar · 06-22-2008, 10:11 PM

Quote:

Originally Posted by Herzig

Yeah, that Cobra was sold to one of my Groomsmen a couple of years ago. It was LOUD. But that was when the big driver heads became popular. My PING G10 is nowhere near as loud.

This LD F is this years model and they dampened down the sound a great deal from previous models.

05-11-2008, 11:49 AM
smittysbar Right in the Lumberyard Danny Join Date: Aug 2007 Location: LaPlata, MO Casino cash: $10004942	*Official Bushwood Country Club Lounge* Okay, here is a place for the Golfers to talk about tournaments, clubs, swing help or thoughts. Today is the Players Championship, which I think ought to be the 5th Major. Largest pot in the PGA. The daunting 17th, which seems to bring excitement every year. At least we will get to see Sergio blow up yet again. I am ready to see some water balls!
Posts: 6,646

06-22-2008, 08:36 PM	#514
smittysbar Right in the Lumberyard Danny Join Date: Aug 2007 Location: LaPlata, MO Casino cash: $10004942	Every shaft has a kick point. The lower the kick point the higher the ball flight. High or mid kick point will usually result in a lower launch. The lower the Torque # in a shaft, is most likely the higher the price. Less twisting of the club head. A good thing to do is go somewhere and get fitted, you don't have to buy from them but a good pro could tell you what shaft would fit you the best. __________________ Last edited by smittysbar; 06-22-2008 at 09:30 PM..
Posts: 6,646

06-22-2008, 08:55 PM	#518
smittysbar Right in the Lumberyard Danny Join Date: Aug 2007 Location: LaPlata, MO Casino cash: $10004942	From Tom Wishon A. The term "torque" is taken to mean the shaft's designed resistance to twisting during the downswing. The torque value is expressed in degrees, so the lower the degrees of torque, the more resistance the shaft will have to being twisted from the force of the downswing on the clubhead attached to that shaft. The higher the degrees of torque, the less resistance the shaft will have to being twisted by the mass of the clubhead on the downswing. In steel shafts, because the type of steel material is the same throughout the entire shaft, the torque exists in a very narrow range of degrees, one that is much more narrow than in graphite shafts. Graphite shafts can be and often are made with a wide variety of different graphite fiber strength, stiffness and position on the shaft. This allows the torque in graphite shafts to range from as high as 7 or 8 degrees to as low as 1 degree, while in steel this range is only from a little more than 2 degrees to a little under 4 degrees. *Therefore, torque is not* a factor to worry about in the selection of a steel shaft, but it is a point to keep in mind for some golfers when selecting a graphite shaft.** Fortunately, the fitting ramifications of torque even in graphite shafts is not that severe. Simply stated, it means that if you are a big strong, powerful person with an aggressive swing tempo and a late release, you never want the torque in a graphite shaft to be any higher than 4 to 4.5 degrees. Otherwise, your strength and downswing force may cause the clubhead to twist the shaft, causing the clubface to be more open at impact, and resulting in a shot that hangs or fades to the right of your target. Conversely, if you have a very smooth, rhythmic swing without a very aggressive downswing move, you do not want to use graphite shafts with the torque below 3.5 degrees or else the impact feel of the shot can be stiff, harsh and unsolid, and the height of the shot may be too low. So for most golfers, as long the torque of a graphite shaft is between 3.5 and 5.5 degrees - which is the case for the vast majority of graphite shafts today - the golfer will be OK and torque will never be a factor to worry about in the shaft fitting. __________________
Posts: 6,646

06-22-2008, 09:00 PM	#519
Skip Towne Supporter Join Date: Apr 2001 Location: T-Town Casino cash: $10004900	Heh, I had a set of clubs that had a "reverse twist" built into the shaft for "anti torque". I think they were McGregor's.
Posts: 69,689

06-22-2008, 09:08 PM	#520
smittysbar Right in the Lumberyard Danny Join Date: Aug 2007 Location: LaPlata, MO Casino cash: $10004942	As club head size has increased so has the need for low torque shafts, these heads on the new drivers are mammoth. Mine looks like a frying pan. __________________
Posts: 6,646

06-22-2008, 09:10 PM	#522
smittysbar Right in the Lumberyard Danny Join Date: Aug 2007 Location: LaPlata, MO Casino cash: $10004942	yeah mine is loud as hell too. __________________
Posts: 6,646