Home Discord Chat
Go Back   ChiefsPlanet > Nzoner's Game Room > Media Center
Reload this Page Electronics Anyone Doing 3D Printing?
Register FAQDonate Members List Calendar

Reply
Page 3 of 4 12 3 4
 
Thread Tools Display Modes
Old 01-16-2021, 11:01 AM  
Otter Otter is offline
Live free or die hard
 
Otter's Avatar
 
Join Date: Sep 2000
Location: Durango, CO
Casino cash: $848382
Anyone Doing 3D Printing?
I'm in the process of purchasing a 3d printer. This thread will follow my journey as I learn to 3d print. Below I found a good guide on YouTube for an overview with additional videos on the channel for more in depth and specific topics.

Beginner Guide (Good watch):



Good Budget Printer ~$200: https://amzn.to/2XdlFJ1





Website for premade designs: https://www.thingiverse.com/

Spice rack and Chiefs emblem are on the top of the priority list.

Good (free software) for designing for your own: https://www.autodesk.com/products/fusion-360/personal

Cool shit https://www.reddit.com/r/3Dprinting/

Please post tips, etc. if you have any
Posts: 27,340
Otter is obviously part of the inner Circle.Otter is obviously part of the inner Circle.Otter is obviously part of the inner Circle.Otter is obviously part of the inner Circle.Otter is obviously part of the inner Circle.Otter is obviously part of the inner Circle.Otter is obviously part of the inner Circle.Otter is obviously part of the inner Circle.Otter is obviously part of the inner Circle.Otter is obviously part of the inner Circle.Otter is obviously part of the inner Circle.
     Reply With Quote
Old 01-28-2024, 04:11 AM   #31
Fish Fish is offline
Ain't no relax!
 
Fish's Avatar
 

Join Date: Sep 2005
Casino cash: $238919
Stand for my XBox controller, 3D scanned model for exact fit. Added non-slip rubber dots to the base.





__________________
Posts: 48,458
Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.
 Thumbs Up 2 Thumbs Down 0     Reply With Quote
Old 01-28-2024, 08:03 AM   #32
modocsot modocsot is offline
Starter
 

Join Date: Oct 2003
Location: Jax, FL (Southbank)
Casino cash: $5009244
Is there a type of 3D printing that creates a smooth surface? All the pieces I’ve seen have distinctly rough surfaces that identify itself as “3D printed”.
Posts: 250
modocsot has disabled reputation
     Reply With Quote
Old 01-28-2024, 08:27 AM   #33
BigBeauford BigBeauford is offline
MVP
 
BigBeauford's Avatar
 

Join Date: Oct 2012
Location: Lenexa, KS
Casino cash: $1886717
Made my pops this morning and evening pill organizer.
Posts: 14,404
BigBeauford is obviously part of the inner Circle.BigBeauford is obviously part of the inner Circle.BigBeauford is obviously part of the inner Circle.BigBeauford is obviously part of the inner Circle.BigBeauford is obviously part of the inner Circle.BigBeauford is obviously part of the inner Circle.BigBeauford is obviously part of the inner Circle.BigBeauford is obviously part of the inner Circle.BigBeauford is obviously part of the inner Circle.BigBeauford is obviously part of the inner Circle.BigBeauford is obviously part of the inner Circle.
 Thumbs Up 3 Thumbs Down 0     Reply With Quote
Old 01-28-2024, 09:30 AM   #34
loochy loochy is offline
Hey Loochy, I'm hooome!
 
loochy's Avatar
 

Join Date: Oct 2008
Location: PooPooKaKaPeePeeShire
Casino cash: $70397
Quote:
Originally Posted by modocsot View Post
Is there a type of 3D printing that creates a smooth surface? All the pieces I’ve seen have distinctly rough surfaces that identify itself as “3D printed”.
No.

Depending on the material used you can sand it or use chemical vapors to smooth it
__________________
Hey Loochy, I'm hoooome!
Posts: 41,374
loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.
     Reply With Quote
Old 11-01-2024, 08:57 AM   #35
DaFace DaFace is offline
Kind of a mod
 
DaFace's Avatar
 

Join Date: Aug 2005
Location: Donkey Land
Casino cash: $-43101
Just purchased one myself (arrived yesterday). I made my first print the cliche tchotchkes - fitting for the holiday.



However, I think I'll be spending most of my time for a while working on organizers. The Gridfinity system is awesome, so I'm printing all sorts of grids and bins for drawers and my modest little shop. It's pretty crazy how much you can do!
Posts: 52,577
DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.
 Thumbs Up 2 Thumbs Down 0     Reply With Quote
Old 11-01-2024, 09:10 AM   #36
KCUnited KCUnited is offline
Cheat Death
 
KCUnited's Avatar
 

Join Date: Nov 2007
Location: Land of Drincoln
Casino cash: $218244
My neighbor made me a beer bottle holder used for drying out washed bottles for homebrewing. The bottles sit upside down to drain and dry out

I only bottle for competition entries but its pretty handy

I don't have one myself but think it would be super handy for organizing
Posts: 35,682
KCUnited is obviously part of the inner Circle.KCUnited is obviously part of the inner Circle.KCUnited is obviously part of the inner Circle.KCUnited is obviously part of the inner Circle.KCUnited is obviously part of the inner Circle.KCUnited is obviously part of the inner Circle.KCUnited is obviously part of the inner Circle.KCUnited is obviously part of the inner Circle.KCUnited is obviously part of the inner Circle.KCUnited is obviously part of the inner Circle.KCUnited is obviously part of the inner Circle.
     Reply With Quote
Old 11-01-2024, 09:14 AM   #37
loochy loochy is offline
Hey Loochy, I'm hooome!
 
loochy's Avatar
 

Join Date: Oct 2008
Location: PooPooKaKaPeePeeShire
Casino cash: $70397
I'm having a hell office a time getting little stuff to stay stuck to the plate. It always pops off and then everything fouls and ruins the print
__________________
Hey Loochy, I'm hoooome!
Posts: 41,374
loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.loochy is obviously part of the inner Circle.
     Reply With Quote
Old 11-01-2024, 09:23 AM   #38
DaFace DaFace is offline
Kind of a mod
 
DaFace's Avatar
 

Join Date: Aug 2005
Location: Donkey Land
Casino cash: $-43101
Quote:
Originally Posted by loochy View Post
I'm having a hell office a time getting little stuff to stay stuck to the plate. It always pops off and then everything fouls and ruins the print
I'm a n00b and know nothing, but have you tried different plates? From what I understand, some are better at sticking than others.
Posts: 52,577
DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.
     Reply With Quote
Old 11-01-2024, 09:54 AM   #39
Fish Fish is offline
Ain't no relax!
 
Fish's Avatar
 

Join Date: Sep 2005
Casino cash: $238919
Quote:
Originally Posted by loochy View Post
I'm having a hell office a time getting little stuff to stay stuck to the plate. It always pops off and then everything fouls and ruins the print
Before you print, clean your plate vigorously with isopropyl alcohol. Every time.

Be sure to use Brim. And increase the temp of your plate by 2-3 degrees for the first layer. Both will really help that first layer to stick.

If you model is top heavy in any way, you must use supports. Many models require them for a successful print. Sometimes it's a pain, as you'll use more filament for the supports than you do for the actual model.

If you have a particular model that's giving you trouble, link the model here.
__________________
Posts: 48,458
Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.
     Reply With Quote
Old 11-01-2024, 10:01 AM   #40
DaFace DaFace is offline
Kind of a mod
 
DaFace's Avatar
 

Join Date: Aug 2005
Location: Donkey Land
Casino cash: $-43101
I have kind of the opposite issue - it's kind of a pain in the ass to get it to release from the plate after. Is the solution just to be patient and let the plate cool down? I think that's the case, but I have tons that I want to print, so I'm impatient.
Posts: 52,577
DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.
     Reply With Quote
Old 11-01-2024, 10:06 AM   #41
Fish Fish is offline
Ain't no relax!
 
Fish's Avatar
 

Join Date: Sep 2005
Casino cash: $238919
Quote:
Originally Posted by DaFace View Post
I have kind of the opposite issue - it's kind of a pain in the ass to get it to release from the plate after. Is the solution just to be patient and let the plate cool down? I think that's the case, but I have tons that I want to print, so I'm impatient.
Yeah, it's easier when it cools down.

But ain't nobody got time for that....

Try this.. https://www.amazon.com/Premium-Print.../dp/B075SLTY8B
__________________
Posts: 48,458
Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.Fish is obviously part of the inner Circle.
 Thumbs Up 1 Thumbs Down 0     Reply With Quote
Old 11-01-2024, 12:09 PM   #42
allen_kcCard allen_kcCard is offline
Veteran
 

Join Date: Sep 2004
Location: Kansas City
Casino cash: $3433183
yeah...cooldown will help it pop loose, it is about the expanding and contracting of the plate, most overnight prints I come back to have popped loose themself.

For things coming loose during print, brim will absolutely help, you can also make your brim larger to help it adhere. I also turned my bed temp up a slight amount for one print that kept warping on me because part of the print pulled off as it was cooling during the print.
Posts: 2,775
allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.
     Reply With Quote
Old 11-01-2024, 12:11 PM   #43
allen_kcCard allen_kcCard is offline
Veteran
 

Join Date: Sep 2004
Location: Kansas City
Casino cash: $3433183
Something I would love to find a way to get started on with our 3d printing is selling prints to make some money off of. If anyone does it and has success, I'd love to hear more about how you got started on it. I got gunshy as I read more about print files that have no commercial flags on them and all that. Like can I change one some and make it my own? Or do I have to start from scratch, etc.
Posts: 2,775
allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.allen_kcCard would the whole thing.
     Reply With Quote
Old 11-02-2024, 08:24 AM   #44
Buehler445 Buehler445 is offline
Supporter
 
Buehler445's Avatar
 

Join Date: Apr 2007
Location: Scott City KS
Casino cash: $244734
Quote:
Originally Posted by DaFace View Post
Just purchased one myself (arrived yesterday). I made my first print the cliche tchotchkes - fitting for the holiday.



However, I think I'll be spending most of my time for a while working on organizers. The Gridfinity system is awesome, so I'm printing all sorts of grids and bins for drawers and my modest little shop. It's pretty crazy how much you can do!
Cool man.

I've thought a lot about diving down the organizer path. But honestly, I don't think I need anything else to occupy my time at the moment. I need you to figure it all out and then tell me how to get a turnkey system rolling...
Posts: 58,318
Buehler445 is obviously part of the inner Circle.Buehler445 is obviously part of the inner Circle.Buehler445 is obviously part of the inner Circle.Buehler445 is obviously part of the inner Circle.Buehler445 is obviously part of the inner Circle.Buehler445 is obviously part of the inner Circle.Buehler445 is obviously part of the inner Circle.Buehler445 is obviously part of the inner Circle.Buehler445 is obviously part of the inner Circle.Buehler445 is obviously part of the inner Circle.Buehler445 is obviously part of the inner Circle.
     Reply With Quote
Old 11-02-2024, 10:15 AM   #45
DaFace DaFace is offline
Kind of a mod
 
DaFace's Avatar
 

Join Date: Aug 2005
Location: Donkey Land
Casino cash: $-43101
Quote:
Originally Posted by Buehler445 View Post
Cool man.

I've thought a lot about diving down the organizer path. But honestly, I don't think I need anything else to occupy my time at the moment. I need you to figure it all out and then tell me how to get a turnkey system rolling...
It's been easier to pick up than I expected, honestly. I got a Bambu P1S (without the multicolor gizmo), and they've created an ecosystem that really tries to make it as foolproof as it can be. It comes with its own app that handles file preparation (slicing), print monitoring, and even model finding (though you can find them on all sorts of other sites too). It took me probably 45 minutes from unboxing to printing that little cauldron, and I know almost nothing about any sort of CAD.

And for organizing, specifically, I'm focusing on the Gridfinity system. The gist is that it's a "standard" of sorts where everything is built on a 42x42mm grid. But the magic is that you can use this website to generate all sorts of combinations of bins. It looks a little intimidating at first glance, but is easy to just play with until you get something you like. (You can also find tons of custom projects online that work in the same system)

My first project with that was taking a little bin that we keep our Bubly drops in for our Sodastream that was driving me a little nuts. The bottles could slide all around, so they never stayed in place. So I printed a little bin to hold them that was exactly the size I needed. Small things, but it's super satisfying.

Old:


New:
Posts: 52,577
DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.DaFace is obviously part of the inner Circle.
 Thumbs Up 3 Thumbs Down 0     Reply With Quote
Reply
Page 3 of 4 12 3 4

« Previous Thread | > Nzoner's Game Room > Media Center < | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump




All times are GMT -6. The time now is 05:00 AM.

Contact Us - ChiefsPlanet - Archive - Top

This is a test for a client's site.
Fort Worth Texas Process Servers
Covering Arlington, Fort Worth, Grand Prairie and surrounding communities.
Tarrant County, Texas and Johnson County, Texas.
Advertise with us!
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.