Other Sports Off Season Lets Talk Guns, Part 2 - Page 20

HonestChieffan · 05:52 PM

Been a while since we had a guns n' ammo discussion.

Some of you are AR shooters Im sure. Im looking at a Colt 6920. Will be my first AR. Picked up a Glock this fall and really enjoy shooting it. Any feedback on that weapon?

Anyone else been in a buy/sell/trade mood with hardware?

**notorious** · 06-16-2016, 10:20 AM

Quote:

Originally Posted by Trivers

Cabales currently having a 10% on powder and 15% off on primers in stock sale.

Picked up 3K of CCI 450; and 3lbs of 1680 (that I had stashed in a secret location waiting for such a sale).

Now if I can find a great deal on 5K of 300 BlK cases..

Make your own!

We purchased a tiny lathe and blade setup that cuts down 5.56 brass. It cost around 300 for everything but it will pay itself off.

stlchiefs · 06-16-2016, 10:41 AM

Quote:

Originally Posted by Munson

Good deal. But you could also buy from here for the same price, without paying tax, and free shipping to your FFL.

For the price point, is that the gun you'd buy? Is this an actual sale or can you find them for this price somewhere all the time? Thanks for all the info!

**notorious** · 06-16-2016, 10:57 AM

It all depends on what you need/want.

A S&W MP will work for 98% of people out there that like to plink and play around. For the 2% that are hardcore you probably want a piston AR with a tougher barrel, decent hand guard and buttstock. Another alternative is to get a nickel-boron bolt and carrier group which helps a little with carbon fouling.

Gas guns are inherently more accurate than their piston counterparts, but once again, it all depends on what you need.

stlchiefs · 06-16-2016, 11:21 AM

Quote:

Originally Posted by notorious

It all depends on what you need/want.

A S&W MP will work for 98% of people out there that like to plink and play around. For the 2% that are hardcore you probably want a piston AR with a tougher barrel, decent hand guard and buttstock. Another alternative is to get a nickel-boron bolt and carrier group which helps a little with carbon fouling.

Gas guns are inherently more accurate than their piston counterparts, but once again, it all depends on what you need.

Honestly, just looking to grab an AR. Not wanting to build my own and totally a plinker. I'm in the 98%. That being said, is this a good deal on a good gun or should I consider something different in this price point? Does a deal like this come around much?

**notorious** · 06-16-2016, 11:27 AM

Quote:

Originally Posted by stlchiefs

Honestly, just looking to grab an AR. Not wanting to build my own and totally a plinker. I'm in the 98%. That being said, is this a good deal on a good gun or should I consider something different in this price point? Does a deal like this come around much?

It's a pretty common price, but if you are ready just buy. You never know when people are going to panic and a 600 Gun becomes a 1500 gun.

**Munson** · 06-16-2016, 02:14 PM

Quote:

Originally Posted by stlchiefs

For the price point, is that the gun you'd buy? Is this an actual sale or can you find them for this price somewhere all the time? Thanks for all the info!

I almost bought one a couple days ago when it came with 4 additional Pmags. For the price, its hard to beat. You can't go wrong with the S&W as your first AR15.

You're going to find that many places are going to start selling out of many AR15's, or significantly raise their prices due to Orlando and the calls for a new Assault Weapons Ban from the Democrats. Same thing with ammo and mags. It would be wise to stock up.

If you find an AR15 you like that is in stock, and fairly priced, I would NOT wait to grab it.

**Perineum Ripper** · 06-16-2016, 03:07 PM

So I need to brag to you guys a little bit

I got a call from a buddy who knows some guys who work on custom made guns saying they were going to test a new gun they were working on. I drove down to Texas to check it out and shoot the gun some as well. It was a great gun and was a blast to shoot. Basically a McMillan but with some changes to it. We were shooting out to 1500 yds with very good consistency then we moved to 2000 yds and by the end of the day of shooting I made a shot at 2750 yds and busted a milk jug.

As a sniper in the military my furthest shot on a target was 1700. I was impressed I added another 1000 yds tof my personal best. So I wanted to come brag a little

**notorious** · 06-16-2016, 03:19 PM

Quote:

Originally Posted by mac459

So I need to brag to you guys a little bit

I got a call from a buddy who knows some guys who work on custom made guns saying they were going to test a new gun they were working on. I drove down to Texas to check it out and shoot the gun some as well. It was a great gun and was a blast to shoot. Basically a McMillan but with some changes to it. We were shooting out to 1500 yds with very good consistency then we moved to 2000 yds and by the end of the day of shooting I made a shot at 2750 yds and busted a milk jug.

As a sniper in the military my furthest shot on a target was 1700. I was impressed I added another 1000 yds tof my personal best. So I wanted to come brag a little

Lobbing artillery!

What cartridge were you shooting?

**Perineum Ripper** · 06-16-2016, 03:53 PM

Quote:

Originally Posted by notorious

Lobbing artillery!

What cartridge were you shooting?

It was a 416 Barrett

George Liquor · 06-16-2016, 04:01 PM

Quote:

Originally Posted by notorious

Not that I have seen.

Everything is stocked, and if things run low the manufacturers have a lot larger capacity to produce thanks to the Sandy Hook scare.

After doing an ammo check i need:

100rds of 12 gauge birdshot
100rds of 20 gauge birdshot
100rds (probably 400 to have at least 1000) of .233/5.56
100rds of 9mm

That ought to run me around $120 or so at Cabelas, ya think?

Shooting is expensive.

**notorious** · 06-16-2016, 04:02 PM

Quote:

Originally Posted by mac459

It was a 416 Barrett

Cool.

What kind of glass did they have on it?

(sorry about the questions

)

**Perineum Ripper** · 06-16-2016, 04:46 PM

Quote:

Originally Posted by notorious

Cool.

What kind of glass did they have on it?

(sorry about the questions

)

Nightforce B.E.A.S.T 5-25x56

Was a beautiful scope

Questions are perfectly fine

**srvy** · 06-16-2016, 04:50 PM

They had the owner of Adventure Outdoors a large gun store in Georgia he said AR 15s were flying off the rack at a rate or 15 an hour in his place since Orlando shooting.
Yep if you find one on the rack buy I stopped a couple places on my way home nothing but 22 style AR 15s. They had no idea when they would get restocked. Cabela's is OOS in my area.

Sent from my SM-G928V using Tapatalk

**notorious** · 06-16-2016, 05:39 PM

Quote:

Originally Posted by mac459

Nightforce B.E.A.S.T 5-25x56

Was a beautiful scope

Questions are perfectly fine

One of the best scopes on the planet. I prefer that the turrets worked like normal, but it's still okay.

**Perineum Ripper** · 06-16-2016, 06:26 PM

Quote:

Originally Posted by notorious

One of the best scopes on the planet. I prefer that the turrets worked like normal, but it's still okay.

I love Nightforce..I hate paying the price for them but the clarity and the quality of scope is unmatched..for me anyway

01-23-2011, 11:58 AM
HonestChieffan Seeking the Truth daily Join Date: Jan 2006 Location: In the Country in MO Casino cash: $424309	Off Season Lets Talk Guns, Part 2 Been a while since we had a guns n' ammo discussion. Some of you are AR shooters Im sure. Im looking at a Colt 6920. Will be my first AR. Picked up a Glock this fall and really enjoy shooting it. Any feedback on that weapon? Anyone else been in a buy/sell/trade mood with hardware? Last edited by Bearcat; 07-28-2015 at 05:52 PM..
Posts: 53,898

06-16-2016, 10:57 AM	#288
notorious Supporter Join Date: May 2005 Location: Who knows? Casino cash: $1055884	It all depends on what you need/want. A S&W MP will work for 98% of people out there that like to plink and play around. For the 2% that are hardcore you probably want a piston AR with a tougher barrel, decent hand guard and buttstock. Another alternative is to get a nickel-boron bolt and carrier group which helps a little with carbon fouling. Gas guns are inherently more accurate than their piston counterparts, but once again, it all depends on what you need.
Posts: 85,931

06-16-2016, 03:07 PM	#292
Perineum Ripper Supporter Join Date: Jan 2014 Location: Missouri Casino cash: $129542	So I need to brag to you guys a little bit I got a call from a buddy who knows some guys who work on custom made guns saying they were going to test a new gun they were working on. I drove down to Texas to check it out and shoot the gun some as well. It was a great gun and was a blast to shoot. Basically a McMillan but with some changes to it. We were shooting out to 1500 yds with very good consistency then we moved to 2000 yds and by the end of the day of shooting I made a shot at 2750 yds and busted a milk jug. As a sniper in the military my furthest shot on a target was 1700. I was impressed I added another 1000 yds tof my personal best. So I wanted to come brag a little
Posts: 5,255

06-16-2016, 04:50 PM	#298
srvy Fight, build, win! Join Date: Sep 2004 Location: KC Casino cash: $-198750	They had the owner of Adventure Outdoors a large gun store in Georgia he said AR 15s were flying off the rack at a rate or 15 an hour in his place since Orlando shooting. Yep if you find one on the rack buy I stopped a couple places on my way home nothing but 22 style AR 15s. They had no idea when they would get restocked. Cabela's is OOS in my area. Sent from my SM-G928V using Tapatalk __________________ "The victim stance is a powerful one. The victim is always morally right, neither responsible nor accountable, and forever entitled to sympathy."
Posts: 25,262