Other Sports Off Season Lets Talk Guns, Part 2 - Page 115

HonestChieffan · 05:52 PM

Been a while since we had a guns n' ammo discussion.

Some of you are AR shooters Im sure. Im looking at a Colt 6920. Will be my first AR. Picked up a Glock this fall and really enjoy shooting it. Any feedback on that weapon?

Anyone else been in a buy/sell/trade mood with hardware?

ghak99 · 03-26-2018, 02:30 PM

Quote:

Originally Posted by LiveSteam

I'm gonna start reloading for shotgun.. Waterfowl loads are outrageous these days.

https://youtu.be/LZIbmcM2oZA

I think you'll like what you find.

The performance of steel hand loads are much much better than factory steel loads. I was able to move up 300fps allowing me to decrease size to increase pellet count and ducks magically started falling dead without needing a follow up.

I got along the best with the Remington 3" cases, but absolutely hated Remington factory loads. Finally talked a buddy who shot them into picking up all his empties.

GloryDayz · 03-26-2018, 04:06 PM

Quote:

Originally Posted by LiveSteam

I'm gonna start reloading for shotgun.. Waterfowl loads are outrageous these days.

https://youtu.be/LZIbmcM2oZA

In the past I've looked at the "RCBS Rock Chucker Supreme Master Reloading Kit, Green". I'd still need dies, holder and other things to make it work, pluse supplies, but at $0.60 a round, it might make sense soon. If I could get a complete kit (that's trustworthy) for ~$200, I've do it in the blink of an eye.

LiveSteam · 03-26-2018, 04:58 PM

I'm just a poor single stage guy. But I've reloaded thousands of rounds on the Lee Anniversary kit.
I've thought about buying a progressive pres.
But I'm more worried about consistency than volume. So a single stage works good for that.

The real savings is in Match Grade ammo. It adds up fast there

Randallflagg · 03-26-2018, 04:58 PM

Quote:

Originally Posted by GloryDayz

In the past I've looked at the "RCBS Rock Chucker Supreme Master Reloading Kit, Green". I'd still need dies, holder and other things to make it work, pluse supplies, but at $0.60 a round, it might make sense soon. If I could get a complete kit (that's trustworthy) for ~$200, I've do it in the blink of an eye.

That "it might make sense soon" comment is probably the absolute truth. I look for ammo to go through the roof shortly....unfortunately.

That's why I have always "stocked up" every time I see a sale....

LiveSteam · 03-26-2018, 05:04 PM

Quote:

Originally Posted by ghak99

I think you'll like what you find.

The performance of steel hand loads are much much better than factory steel loads. I was able to move up 300fps allowing me to decrease size to increase pellet count and ducks magically started falling dead without needing a follow up.

I got along the best with the Remington 3" cases, but absolutely hated Remington factory loads. Finally talked a buddy who shot them into picking up all his empties.

Ive read several others that said the same. After hunting with a friends hand loads. They went right out and got set up for loading their own..

**srvy** · 03-26-2018, 05:58 PM

Quote:

Originally Posted by GloryDayz

In the past I've looked at the "RCBS Rock Chucker Supreme Master Reloading Kit, Green". I'd still need dies, holder and other things to make it work, pluse supplies, but at $0.60 a round, it might make sense soon. If I could get a complete kit (that's trustworthy) for ~$200, I've do it in the blink of an eye.

Rock chucker is a nice press a buddy of mine has that one and I showed him how to set it up and use it very solid. Lymon, Hornaday and Redding are also are or were when I searched out mine many a moon ago. I settled on Hornaday and was very pleased. In 2006 when my dad passed I inherited my dads Pacific he called it the iron giant it is a beast. My only problem with lee was its cast and had read about them actually breaking dont know if they have changed. As for dies I only will use RCBS, Lymon and Redding more expensive because they are or were milled from a solid block and the important parts precision polished. You will learn the hard way with alloy hornaday or lee that are alloy and prone to dented or stuck cases. They may have changed by now or they may have all gone that route. I sold my hornaday last year to a coworker so ya missed out sorry. I am talking all single stage as I never felt the need for a progressive outside of a shotshell reloader.

**srvy** · 03-26-2018, 06:23 PM

The biggest advantage for me handloading for rifle hunting was I got to choose my type bullet and weight. Also precision and accuracy from the bench so much better than out the box ammo.

My friend and deer hunting buddy sold his favorite .308 whitetail rifle for a .270 win. He wanted to hunt mulies in the mountains and whitetails in Missouri. Problem was it shoots at a velocity that over the counter ammo wasnt suitable for Missouri distances in timber etc. The bullet would blow right through the animal and open out or mushroom to late. He was have deer run off instead or falling on the spot with his 308. He was about to sell it and told him let me try to fix it. I got the heaviest grain bullet in 270 cal Nosler partitions made very expensive also got a cheaper barnes of simular design. Got him dialed in powder type that preformed best at the bench. The next year sucess like the old 308 he was a happy camper and bought himself a rock chucker at seasons end. He still has that 270 aproahing nearly 20 years.

GloryDayz · 03-26-2018, 08:06 PM

Quote:

Originally Posted by srvy

Rock chucker is a nice press a buddy of mine has that one and I showed him how to set it up and use it very solid. Lymon, Hornaday and Redding are also are or were when I searched out mine many a moon ago. I settled on Hornaday and was very pleased. In 2006 when my dad passed I inherited my dads Pacific he called it the iron giant it is a beast. My only problem with lee was its cast and had read about them actually breaking dont know if they have changed. As for dies I only will use RCBS, Lymon and Redding more expensive because they are or were milled from a solid block and the important parts precision polished. You will learn the hard way with alloy hornaday or lee that are alloy and prone to dented or stuck cases. They may have changed by now or they may have all gone that route. I sold my hornaday last year to a coworker so ya missed out sorry. I am talking all single stage as I never felt the need for a progressive outside of a shotshell reloader.

I have a one kid's knee surgery to pay for, then we're all headed to Cozumel for some drift diving in June, and, last, they younger son has a new hobby - flying. It's going to have to wait until those bills are paid off before daddy gets his next toy.

ghak99 · 03-26-2018, 08:23 PM

Quote:

Originally Posted by LiveSteam

Ive read several others that said the same. After hunting with a friends hand loads. They went right out and got set up for loading their own..

Something else worth mentioning. I have a couple progressives, but I hand load all of my steel loads because of powder flow issues. The powders simply won't flow consistent enough for me to trust them when running on the upper end of pressures.

If you hand load match style rimfire then you already know game. I enjoy using the time to slow life down and decompress, but some hunting buddies despise how meticulous it is and gave up.

ghak99 · 03-26-2018, 08:27 PM

Quote:

Originally Posted by GloryDayz

In the past I've looked at the "RCBS Rock Chucker Supreme Master Reloading Kit, Green". I'd still need dies, holder and other things to make it work, pluse supplies, but at $0.60 a round, it might make sense soon. If I could get a complete kit (that's trustworthy) for ~$200, I've do it in the blink of an eye.

I use a rock chucker for my 300RUM loads. I see absolutely nothing wrong with them.

**srvy** · 03-26-2018, 08:41 PM

Quote:

Originally Posted by GloryDayz

I have a one kid's knee surgery to pay for, then we're all headed to Cozumel for some drift diving in June, and, last, they younger son has a new hobby - flying. It's going to have to wait until those bills are paid off before daddy gets his next toy.

Understood

Chief Roundup · 03-28-2018, 05:05 PM

https://www.cbsnews.com/pictures/gun...tag=ACQ449302a

Interesting stats for what percentage of each states population owns guns.

**notorious** · 03-28-2018, 08:06 PM

Quote:

Originally Posted by Chief Roundup

https://www.cbsnews.com/pictures/gun...tag=ACQ449302a

Interesting stats for what percentage of each states population owns guns.

Hawaii. Holy shit!

kepp · 03-29-2018, 08:21 AM

Quote:

Originally Posted by Chief Roundup

https://www.cbsnews.com/pictures/gun...tag=ACQ449302a

Interesting stats for what percentage of each states population owns guns.

Missouri needs to step up it's game. 35th?

Frazod · 03-29-2018, 08:30 AM

Quote:

Originally Posted by kepp

Missouri needs to step up it's game. 35th?

I was surprised that Nebraska was so low.

01-23-2011, 11:58 AM
HonestChieffan Seeking the Truth daily Join Date: Jan 2006 Location: In the Country in MO Casino cash: $354309	Off Season Lets Talk Guns, Part 2 Been a while since we had a guns n' ammo discussion. Some of you are AR shooters Im sure. Im looking at a Colt 6920. Will be my first AR. Picked up a Glock this fall and really enjoy shooting it. Any feedback on that weapon? Anyone else been in a buy/sell/trade mood with hardware? Last edited by Bearcat; 07-28-2015 at 05:52 PM..
Posts: 53,921

03-26-2018, 04:58 PM	#1713
LiveSteam The Constitutional Choo choo Join Date: Dec 2009 Location: homeof43conferencetitles Casino cash: $275432	I'm just a poor single stage guy. But I've reloaded thousands of rounds on the Lee Anniversary kit. I've thought about buying a progressive pres. But I'm more worried about consistency than volume. So a single stage works good for that. The real savings is in Match Grade ammo. It adds up fast there __________________ Progressivism.. The Politically Correct way of saying "I'm a Communist slash Nazi" depending on what the issue of the day is?
Posts: 44,519

03-26-2018, 06:23 PM	#1717
srvy Fight, build, win! Join Date: Sep 2004 Location: KC Casino cash: $-268750	The biggest advantage for me handloading for rifle hunting was I got to choose my type bullet and weight. Also precision and accuracy from the bench so much better than out the box ammo. My friend and deer hunting buddy sold his favorite .308 whitetail rifle for a .270 win. He wanted to hunt mulies in the mountains and whitetails in Missouri. Problem was it shoots at a velocity that over the counter ammo wasnt suitable for Missouri distances in timber etc. The bullet would blow right through the animal and open out or mushroom to late. He was have deer run off instead or falling on the spot with his 308. He was about to sell it and told him let me try to fix it. I got the heaviest grain bullet in 270 cal Nosler partitions made very expensive also got a cheaper barnes of simular design. Got him dialed in powder type that preformed best at the bench. The next year sucess like the old 308 he was a happy camper and bought himself a rock chucker at seasons end. He still has that 270 aproahing nearly 20 years. __________________ "The victim stance is a powerful one. The victim is always morally right, neither responsible nor accountable, and forever entitled to sympathy."
Posts: 25,283

03-28-2018, 05:05 PM	#1722
Chief Roundup Admitted Planet Junky Join Date: Oct 2000 Casino cash: $211627	https://www.cbsnews.com/pictures/gun...tag=ACQ449302a Interesting stats for what percentage of each states population owns guns. __________________ Fanaticism is nowhere. There is no tenderness or humanity in fanaticism.
Posts: 19,420