Quote:
Originally Posted by Boise_Chief
It could be your board but what you are describing is that the furnace isn't seeing airflow from your combustion motor. You have a small motor just inside. Is it turning on. It's fairly obvious. Also you have a little pot that has a small rubber hose tan or clear. Take one end off lightly suck and blow a few times. Replace that end and do the same with the other end. Then try turning it back on
|
Quote:
Originally Posted by Boise_Chief
The tan hose in this picture. You may or may not have it and it could look very different
|
Are we talking about the hose right in the middle of the screenshot? I'm not sucking or blowing any gas in this situation am I?