here is how the bracket works.
Quote:
Look at the picture of starter bridge. The hole labeled #2 goes into the block where the broken screw hole is in the picture of my broken block (labeled #2 on the engine picture also). That area will probably have to be grind down so that the bracket is flush against the block to some degree.
Number 3 on the starter bracket goes to hole #1 on the engine block. Number 1 on the starter bracket goes to the bottom of the starter, which aligns with the hole that is busted on my block (labeled #2 on the engine picture).
Holes #4 & #5 on the starter bracket will go where the two, bottom bell housing bolts are on the engine. You'll remove those two bolts and use them as two of the starter bracket mounting screws.
|